Please Select Your Location
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
Ireland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malta
المملكة العربية السعودية (Arabic)
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Southeast Asia
España
Suisse
Suomi
Sverige
台灣
Ukraine
United Kingdom
United States
Please Select Your Location
België
Česká republika
Denmark
Iceland
Ireland
Italia
Latvija
Lietuva
Lëtzebuerg
Malta
Nederland
Norge
Polska
Portugal
España
Suisse
Suomi
Sverige

Installing the VIVE Cosmos External Tracking Faceplate

Replace the front cover on the headset with the VIVE Cosmos External Tracking Faceplate.
  1. Slide down and hold the lock button inside the compartment to unlatch the front cover.
  2. Pry open the front cover starting from the bottom right corner with the visor facing you.
  3. Carefully pull out the front cover until it detaches from the visor.
  4. Grab the VIVE Cosmos External Tracking Faceplate from the box.
  5. Insert the tabs on the front cover into the slots on the visor.
  6. Press the right side of the front cover first, and then press the left side of the front cover.
  7. With the front cover attached to the visor, press the center of the front cover.
  8. Make sure to minimize the gap between the VIVE Cosmos External Tracking Faceplate and the visor, and that all tabs are fully locked into place.

    You'll hear a click when the VIVE Cosmos External Tracking Faceplate locks in place.

Place the original front cover inside the VIVE Cosmos External Tracking Faceplate box for safekeeping.
Submit
Thank you! Your feedback helps others to see the most helpful information.