Please Select Your Location
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
Ireland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malta
المملكة العربية السعودية (Arabic)
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Southeast Asia
España
Suisse
Suomi
Sverige
台灣
Ukraine
United Kingdom
United States
Please Select Your Location
België
Česká republika
Denmark
Iceland
Ireland
Italia
Latvija
Lietuva
Lëtzebuerg
Malta
Nederland
Norge
Polska
Portugal
España
Suisse
Suomi
Sverige

Reattaching the front and back pads to the headset

Always make sure that the front and back pads are attached to the headset.
  1. While holding the visor with one hand, pull up the band.
  2. Starting from the middle, align the front pad tabs with their corresponding slots on the band, and then press along the front pad. You may need to gently bend the ends of the front pad to align the outermost tabs with the slots on the band.

    Make sure to minimize the gap between the pad and the band and that all tabs are fully locked into place.

  3. Align the back pad tabs with their corresponding slots on the band, and then press along the back pad to reattach.
    Note: Check that the headset cable strip is properly attached. For details, see Reattaching the headset cable strip to the back pad.
    You'll hear a click when the tabs are inserted.

    Make sure to minimize the gap between the pad and the band.

Submit
Thank you! Your feedback helps others to see the most helpful information.