Please Select Your Location
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malta
المملكة العربية السعودية (Arabic)
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Southeast Asia
España
Suisse
Suomi
Sverige
台灣
Ukraine
United Kingdom
United States

Attaching the wireless adapter to VIVE

  1. Remove the original 3-in-1 headset cable from your VIVE headset.

    a) Open the headset compartment to access the connector ports.

    b) Carefully pull the tab to unplug the HDMI cable and then unplug the power and USB cables.

  2. Unfasten the velcro strap on the bottom of the wireless adapter to reveal the cradle clip.

    You should also see two ridges on the cradle.

  3. Hook the cradle clip onto the headset strap.

    a) Original VIVE headset strap: Slide the cradle clip into the sleeve displaying the VIVE logo.

    b) VIVE Deluxe Audio Strap: Align the ridges with the corners on the outer shell of the VIVE Deluxe Audio Strap and slide it down firmly to secure the wireless adapter to the strap.

  4. Fold the vertical strap around the headset band and then fasten the horizontal velcro straps firmly around it to adhere them together.
  5. Connect the 3-in-1 short cable to the respective ports inside the headset compartment.
    Note:

    Make sure you pass the HDMI, USB, and power cables first through the headset strap opening and then through the compartment cover opening.

  6. Close the headset compartment.

    a) Align the ridges on the compartment cover with the corresponding tabs inside the compartment.

    b) Pull the cover down and press it firmly until it snaps into place.

  7. Connect the 3-in-1 short cable to the corresponding ports on the wireless adapter and then connect the adapter to the power bank.
Submit
Thank you! Your feedback helps others to see the most helpful information.