Replace the headset cable.
Replace your VIVE Cosmos headset cable with the short headset cable from the VIVE Cosmos
Adapter Attachment Kit. Here's how.
First, flip up the headset band, peel off the back pad until it detaches from the
headset band, and then
unhook the top strap. Detach the headset cable strip from the back pad.
On the left side of the headset band, flip open the metal clasp of the headphone and
detach the left
headphone and side cushion.
Carefully pull out the face cushion frame to detach it from the visor, then unplug the
Connect the short headset cable to the headset cable port.
Reattach the face cushion frame by aligning its tabs to the slots on the headset and
gently pushing the
face cushion frame in. You'll hear a click when the face cushion frame locks into place.
Reattach the left headphone clip and side cushion to the headset band. Make sure the
stopper is between
the visor and the left headphone.
Attach the wireless adapter head pad for VIVE Cosmos.
Insert the hooks on the buckle of the top headset strap into the holes on the thin
velcro pad. Make sure
the thin velcro pad is flush against the top headset strap.
After attaching the thin velcro pad, hook the top headset strap into the top two center
slots on the
headset band. Gently pull up the top headset strap to lock it into place.
Then align the tabs on the back pad (arrow marker should point up) with their
corresponding slots on the
Press firmly along the back pad to reattach it to the headset band.
Minimize the gap as much as possible between the headset pad and the headset band.
Align and stick the head pad to the thin velcro pad that's attached to the top headset
Replace the cradle.
From the base of the wireless adapter, detach the screws and remove the cradle that's
used for VIVE.
Attach the cradle for VIVE Cosmos to the base of the wireless adapter, and then fasten
the screws back
Attach the wireless adapter to the headset.
Unfasten the velcro strap at the bottom of the wireless adapter.
Hook the clip between the thin velcro pad and the head pad.
Wrap the velcro strap of the wireless adapter around the head pad and press to attach.
Connect the headset cable and power bank to the wireless adapter.
Insert the other end of the short headset cable to the back of the wireless adapter.
Use the long USB cable to connect the power bank to the wireless adapter.
VIVE Cosmos can only use a 21-watt power bank, which we have included in the VIVE Cosmos
Adapter Attachment Kit.