Please Select Your Country

Thailand
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
India
Ireland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malaysia
Malta
Mexico
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Singapore
España
Suisse
Suomi
Sverige
台灣
United Kingdom
United States
Việt Nam
المملكة العربية السعودية (Arabic)

Attaching the wireless adapter to VIVE Pro

To attach the wireless adapter to the VIVE Pro headset, you need to purchase the Wireless Adapter Attachment Kit.

There are three items you need to replace before you can attach VIVE Wireless Adapter to VIVE Pro:

  • Headset cable: for connecting the wireless adapter to your headset
  • Cradle: for attaching the wireless adapter to the top of your headset
  • Head pad cushion: for the back cushion of your headset

Replacing the headset cable

  1. Peel off the face cushion starting from both ends until it detaches from the headset.
  2. Carefully pry open the compartment cover from its flap. Pull the cover out to access the ports on the headset.
  3. Unplug your current headset cable from the headset.
  4. Connect the short headset cable provided in the attachment kit.

    Plug in the L-shaped all-in-one connector of the cable into the headset compartment. Loop the cable around the left edge of the headset band. Press it into the black ridge to fix it in place.

  5. Place the compartment cover back into the headset. Reattach the face cushion to its original position. Make sure the velcro strips are aligned with the headset.

Replacing the head pad cushion

Detach the head pad from the headset. Peel off its cushion. Replace it with the new cushion provided in the attachment kit.

Replacing the cradle and attaching the wireless adapter

  1. From the base of the wireless adapter, detach the screws and remove the cradle used for VIVE.
  2. Attach the cradle for VIVE Pro to the base of the wireless adapter. When attached, fasten the screw tightly.
  3. Unfasten the velcro strap and you'll see a clip on the cradle.
  4. Insert the cradle's clip at the top of the headset strap.
  5. Place the narrow side of the head pad's new cushion on the cradle. Align the top edges of the cushion and the wireless adapter. When aligned, fasten the cradle's velcro strap.
  6. Insert the other end of the short headset cable into the headset cable port at the back of the wireless adapter.
 
No Yes Found this article helpful?