-
VIVE Wireless Adapter Full Pack (VIVE Pro/VIVE Pro Eye/VIVE Cosmos)
-
Setting up your computer
-
Setting up VIVE Pro and VIVE Pro Eye
- Setting up VIVE Pro/VIVE Pro Eye with the wireless adapter
- Replacing the headset cable
- Replacing the head pad
- Attaching the wireless adapter to VIVE Pro/VIVE Pro Eye
- Installing the VIVE Wireless app
- Pairing VIVE Wireless Adapter with your computer
- Updating the VIVE Wireless app
- Changing VIVE Wireless settings
-
Setting up VIVE Cosmos
-
Power bank
-
Multiuser VR with VIVE Pro and VIVE Pro Eye
-
Multiuser VR with VIVE Cosmos
-
Solutions and FAQs
-
Information and support
-
Connecting the wireless link box to your computer
-
After you've finished installing the PCIe
WiGig® card in your computer, connect the cable from the wireless link box to the card. Turn the cable connector clockwise to tighten it.
-
Use the provided clip to mount the wireless link box in place.
- A typical setup is to mount it on top of your computer monitor.
Flip open the base of the clip and attach it upright on top of the computer monitor. Attach the wireless link box on top of the clip, and then turn the screw to tighten it.
Tip:- Ideally, you should mount the wireless link box on the monitor at a height of at least 125 cm (4 ft) from the ground.
- Allow a distance of 150 cm (5 ft) between the wireless link box and your play area.
- Adjust the angle of the wireless link box so it's facing towards you and your play area.
- When using the wireless adapter with your headset, provide a clear line of sight between the wireless link box and yourself.
- Remove any obstacles in your play area.
- For improved performance, especially in multiuser VR environments, adjust the position of the wireless link box.
Try moving the clipped wireless link box. You can also try placing the wireless link box higher than your height.
- A typical setup is to mount it on top of your computer monitor.
- Turn your computer back on.
Found this article helpful?
Yes
No
Submit
Thank You!