-
VIVE Wireless Adapter (VIVE/VIVE Pro)
-
Setup
-
Power bank
-
VIVE Wireless app
-
Multiuser environment
-
Solutions and FAQs
- How long is the cable on the wireless link box?
- What size of PCIe card slot do I need?
- Video quality is unstable, and there are dropped frames or glitches in some VR content. Why is that?
- What should I do when I'm getting an error code 94 after installing the PCIe WiGig card?
- What's the maximum range of VIVE Wireless Adapter and the wireless link box?
- Sometimes the wireless signal seems weak or the headset display gets disrupted. What should I do?
- Why am I not receiving phone notifications in my headset?
- Why can't I update or configure my base stations wirelessly in the SteamVR app?
- Having problems with the PCIe WiGig card?
- Having problems with your headset?
- When my computer connects to my headset through the VIVE Wireless Adapter, why does the SteamVR app take a long time to work properly?
-
Information and support
-
Attaching the wireless adapter to VIVE
-
Remove the 3-in-1 cable that's attached to your
VIVE headset.
First, push open the compartment cover to access the connection ports on your headset. Carefully pull the tab until the HDMI cable is unplugged. Then, unplug the power cable and USB cable.
-
Find the cradle that's attached to the base of the wireless adapter. Unfasten the horizontal velcro strap and you'll see a cradle that has a clip and ridges.
-
To attach the wireless adapter to your headset, do one of the following:
VIVE: Insert the cradle's clip into the sleeve that shows the VIVE logo on the headset strap.
VIVE Deluxe Audio Strap: Align the cradle's ridges with the corners of the top band's hard shell. Press down firmly to attach the wireless adapter in place.
-
To secure the wireless adapter in place, wrap the vertical strap around the headset strap first. Next, wrap the horizontal strap and fasten it.
-
Insert the L-shaped connectors of the 3-in-1 short cable to the headset compartment.
Insert the L-shaped HDMI, USB, and power connectors through the headset strap hole followed by the compartment cover hole.
-
Insert the other end of the 3-in-1 short cable to their respective ports on the wireless adapter.
-
Close the headset compartment.
Align the ridges on the cover with the tabs on the compartment. After the ridges are aligned, push the cover until it snaps in place.
Related How-tos
Found this article helpful?
Yes
No
Submit
Thank You!
Related How-tos
- Sometimes the wireless signal seems weak or the headset display gets disrupted. What should I do?
- Why am I not receiving phone notifications in my headset?
- Having problems with your headset?
- When my computer connects to my headset through the VIVE Wireless Adapter, why does the SteamVR app take a long time to work properly?