-
VIVE Wireless Adapter (VIVE/VIVE Pro)
-
Setup
-
Power bank
-
VIVE Wireless app
-
Multiuser environment
-
Solutions and FAQs
- How long is the cable on the wireless link box?
- What size of PCIe card slot do I need?
- Video quality is unstable, and there are dropped frames or glitches in some VR content. Why is that?
- What should I do when I'm getting an error code 94 after installing the PCIe WiGig card?
- What's the maximum range of VIVE Wireless Adapter and the wireless link box?
- Sometimes the wireless signal seems weak or the headset display gets disrupted. What should I do?
- Why am I not receiving phone notifications in my headset?
- Why can't I update or configure my base stations wirelessly in the SteamVR app?
- Having problems with the PCIe WiGig card?
- Having problems with your headset?
- When my computer connects to my headset through the VIVE Wireless Adapter, why does the SteamVR app take a long time to work properly?
-
Information and support
-
Attaching the wireless adapter to VIVE Pro
To attach the wireless adapter to the
VIVE Pro headset, you need to purchase the
Wireless Adapter Attachment Kit.
There are three items you need to replace before you can attach VIVE Wireless Adapter to VIVE Pro:
- Headset cable: for connecting the wireless adapter to your headset
- Cradle: for attaching the wireless adapter to the top of your headset
- Head pad cushion: for the back cushion of your headset
Replacing the headset cable
-
Peel off the face cushion starting from both ends until it detaches from the headset.
-
Carefully pry open the compartment cover from its flap. Pull the cover out to access the ports on the headset.
- Unplug your current headset cable from the headset.
-
Connect the short headset cable provided in the attachment kit.
Plug in the L-shaped all-in-one connector of the cable into the headset compartment. Loop the cable around the left edge of the headset band. Press it into the black ridge to fix it in place.
-
Place the compartment cover back into the headset. Reattach the face cushion to its original position. Make sure the velcro strips are aligned with the headset.
Replacing the head pad cushion
Detach the head pad from the headset. Peel off its cushion. Replace it with the new cushion provided in the attachment kit.

Replacing the cradle and attaching the wireless adapter
-
From the base of the wireless adapter, detach the screws and remove the cradle used for
VIVE.
-
Attach the cradle for
VIVE Pro to the base of the wireless adapter. When attached, fasten the screw tightly.
-
Unfasten the velcro strap and you'll see a clip on the cradle.
-
Insert the cradle's clip at the top of the headset strap.
-
Place the narrow side of the head pad's new cushion on the cradle. Align the top edges of the cushion and the wireless adapter. When aligned, fasten the cradle's velcro strap.
-
Insert the other end of the short headset cable into the headset cable port at the back of the wireless adapter.
Related How-tos
Found this article helpful?
Yes
No
Submit
Thank You!
Related How-tos
- Sometimes the wireless signal seems weak or the headset display gets disrupted. What should I do?
- Why am I not receiving phone notifications in my headset?
- Having problems with your headset?
- When my computer connects to my headset through the VIVE Wireless Adapter, why does the SteamVR app take a long time to work properly?