Nothing's in my cart
-
VIVE Wireless Adapter for VIVE Cosmos
-
Setup
-
Power bank
-
VIVE Console app
-
Multiuser environment
-
Solutions and FAQs
- How do I set the audio output for VIVE Cosmos when I'm using it with VIVE Wireless Adapter?
- How long is the cable on the wireless link box?
- What size of PCIe card slot do I need?
- Video quality is unstable, and there are dropped frames or glitches in some VR content. Why is that?
- What should I do when I'm getting an error code 94 after installing the PCIe WiGig card?
- What's the maximum range of VIVE Wireless Adapter and the wireless link box?
- Sometimes the wireless signal seems weak or the headset display gets disrupted. What should I do?
- Having problems with the PCIe WiGig card?
- I sometimes have connectivity, audio or display issues while using the VIVE Wireless Adapter with VIVE Cosmos. What should I do?
- Why can't VIVE Cosmos detect my USB device connected to the USB Type-C port?
-
Information and support
-
Connecting the wireless link box to your computer
-
After you've finished installing the PCIe
WiGig® card in your computer, connect the cable from the wireless link box to the card. Turn the cable connector clockwise to tighten it.
-
Use the provided clip to mount the wireless link box in place.
- A typical setup is to mount it on top of your computer monitor.
Flip open the base of the clip and attach it upright on top of the computer monitor. Attach the wireless link box on top of the clip, and then turn the screw to tighten it.
Tip:- Ideally, you should mount the wireless link box on the monitor at a height of at least 125 cm (4 ft) from the ground.
- Allow a distance of 150 cm (5 ft) between the wireless link box and your play area.
- Adjust the angle of the wireless link box so it's facing towards you and your play area.
- When using the wireless adapter with your headset, provide a clear line of sight between the wireless link box and yourself.
- Remove any obstacles in your play area.
- For improved performance, especially in multiuser VR environments, adjust the position of the wireless link box.
Try moving the clipped wireless link box. You can also try placing the wireless link box higher than your height.
- A typical setup is to mount it on top of your computer monitor.
- Turn your computer back on.
Found this article helpful?
Yes
No
Submit
Thank You!